|
|
Model MZ - New Aluminum Heavy Duty - Lightweight Unit!
This unit is replacing our Model MS...and it's only 21 lbs! Designed to test bolts from ½" to 1-1/4" English bolts and equivalent metric sizes. This unit will test up to 126,000 lbs. Please reference the minimum bolt length chart to determine which plates and bushings you will need.
Download the Instruction Manual or product sheet for the Model MZ.
|
|
|
MODEL MS - Our best seller!
This unit is designed for most construction bolts (½" to 1 ¼" English and 10MM to 30MM Metric). We also have developed thinner plates and bushings for extra short bolts. Please reference our minimum bolt length chart to see if you will need short bolt plates and bushings.
Download the instruction manual or product manual for the Model MS.
|
|
|
MODEL HS
This unit is designed for larger bolt sizes (1" to 1 ½" and 27MM to 42MM).
Download the instruction manual or product manual for the Model HS.
|
|
|
MODEL K
Our largest unit! This unit is designed for very large bolts (1 ½" to 2 ½" and 36MM to 64MM) This unit is used most often on Windmill Projects and very large structures.
Download the instruction manual
or product sheet for the Model K.
|
|
|
MODEL S
Designed for small bolts (#6 to ¼" and 3MM to 6MM).
Download the instruction manual for the Model S.
|
|
|
MODEL P
3/8" Bolts Only - Designed for bolt manufacturers and distributors to demonstrate the superiority of their bolts relative to the competition.
Download the instruction manual for the Model P.
|
|
|
MODEL J
Designed for a larger range of small bolts (#10 to 1" and 5MM to 18MM) It is fitted with two gages to enable a larger range of testing.
Download the instruction manual or product manual for the Model J.
|
)
)
)
)
)
)
