Skip to content

Tool Testing FAQs

How do I convert tension to torque?
Please refer to the Tension to Torque Conversion page.

Where can I find training videos on how to use a Bolt Tester?
You can check out our YouTube Channel or visit our training site. Also, please refer to our manuals for specific instructions.

Why shouldn't I use the Model T to test pulse tools?

Pulse tools pose the following technical challenges:

Pulse tools typically “pulse” at frequencies greater than 2000 impulses per minute which is beyond the “impacts per minute” measuring capability of our device. The other challenge is that many pulse tools have an “auto-shutoff” feature that shuts off the tool when it reaches a pre-determined torque. The “shutoff” will occur almost immediately when the pulse tool is activated on our device. The digital signal processing algorithm in our device requires that we collect data over a longer time period than the pulse tool’s auto-shutoff feature allows.

Pulse tools can be tested on any of our hydraulic calibrators, (Model J, Model H, Model RL, Model K etc.) with test bolt assemblies.

 

How do I know if you have certain tool testing units currently in stock?
We assemble and calibrate units upon receipt of order. Typically we keep units and accessories for our Models MZ, HS, RL, and H (for tool testing) available for quick shipments. Other models are available for quick shipment however, we do not stock accessories for these units. Typical lead times are 1-2 weeks depending on our production schedules at the time of order.

How do I find out pricing on tool testing units?
Please contact us with your bolt sizes and we will send you a quote.

How do I purchase a tool testing unit?
Just contact us with your requirements and let us know how you would like to pay for it! We will take care of the rest.

How do I order accessories for my tool testing unit?
Just contact us with your requirements and let us know how you would like to pay for it! We will take care of the rest.

How do I order parts for my tool testing unit?
Just contact us with your requirements and let us know how you would like to pay for it! We will take care of the rest.

How can I have a quote created for my tool testing needs?
Please contact us with your expected torque output range and we will send you a quote.

How do I submit a technical support request?
Please contact us with your request and we will have the appropriate person contact you!

What kind of oil should I put in my unit?
We do not recommend self-service on Skidmore units. We use Mobil DTE hydraulic fluid.

Where can I find an MSDS for R-0050, test bolt lube?
We use Velox 3.

Where can I find the manual for my particular unit?
You've come to the right place Tool Testing Manuals.