Skip to content

Velox Msds

Please use this link to download the PDF version of our test bolt lubricant MSDS or you can review the information below.

 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

            MATERIAL SAFETY DATA SHEET FOR VELOX 3
          TOTAL Lubricants USA, Inc.
     5 N. Stiles Street
      Linden NJ  07036
    REVISION DATE
    08-MAR-06

IDENTIFICATION AND EMERGENCY INFORMATION

PRODUCT NAME:
VELOX 3
CHEMICAL NAME:
N/A - Mixture
PRODUCT APPEARANCE AND ODOR:
Black grease, slight chemical odor
SYNONYMS:
Petroleum-based
PRODUCT #:
200020
CAS #'S:
Mixture
CHEMICAL FAMILY:
Petroleum hydrocarbon
EMERGENCY TELEPHONE:
1-908-862-9300

 COMPONENTS AND HAZARD INFORMATION

COMPONENTS: W/W HAZARD DATA (TLV, LD50, LC50, ETC.):

Asphalt in petroleum oil mixture
CAS # n/a
Petroleum based calcium grease
CAS # n/a
TLV 5mg/meter cubed
(as an oil mist)

n/e

HAZARDOUS MATERIALS IDENTIFICATION SYSTEM (HMIS):
  Health        Flammability    Reactivity

ll0

TRANSPORTATION INFORMATION

TRANSPORTATION/SHIPPING INFORMATION:
Department of Transportation (DOT): Not regulated

EMERGENCY FIRST AID

EYE CONTACT:
If splashed into the eyes, flush with clear water for l5 minutes or until
irritation subsides.  If irritation persists, call a physician.
SKIN CONTACT:
In case of skin contact, remove contaminated clothing and wash skin
thoroughly with soap and water.

INHALATION:
Vapor pressure is very low. Vapor inhalation under ambient conditions is normally not a problem. If overcome by vapor from hot product, immediately remove from exposure and call a physician. If breathing is irregular or has stopped, start resuscitation; administer oxygen if available. If overexposure to oil mist, remove from further exposure until excessive oil mist condition

DATE ISSUED
27-NOV-06

Page 1

             MATERIAL SAFETY DATA SHEET FOR VELOX 3
                TOTAL Lubricants USA, Inc.
                5 N. Stiles Street
                Linden NJ  07036

REVISION DATE
08-MAR-06

EMERGENCY FIRST AID

subsides.
INGESTION:
If ingested, do not induce vomiting. Call a physician immediately.

FIRE AND EXPLOSION HAZARD INFORMATION

FLASH POINT (MINIMUM): AUTOIGNITION TEMPERATURE:
l60°C (320°F) Test method: COC N/E

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) - HAZARD IDENTIFICATION:
  Health        Flammability    Reactivity

ll0

FLAMMABLE OR EXPLOSIVE LIMITS (approximate percent by volume in air):
Estimated values:  lower N/E       upper N/E

EXTINGUISHING MEDIA AND FIRE FIGHTING PROCEDURES:
Foam, water spray (fog), dry chemical, carbon dioxide
type extinguishing agents may all be suitable for extinguishing fires involving this type product, depending on size or potential size of fire and circumstances related to the situation. Water or foam may cause frothing.
Use water to keep fire-exposed containers cool. Water froth may be
used to flush spills away from exposure. Minimize breathing gases, vapor, fumes, or decomposition products. Use NIOSH/MSHA approved supplied-air breathing equipment for enclosed or confined spaces or as otherwise
needed.

UNUSUAL FIRE AND EXPLOSION HAZARDS:
n/a
"EMPTY" CONTAINER WARNING:
Empty containers retain residue (liquid or vapor) and can be dangerous.  DO
NOT PRESSURIZE, WELD, CUT BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH
CONTAINERS TO HEAT, FLAME, SPARKS, OR OTHER SOURCES OF IGNITION; THEY MAY
EXPLODE AND CAUSE INJURY OR DEATH.  Do not attempt to clean since residue is
difficult to remove.  "Empty" drums should be completely drained, properly
bunged, and returned to a drum reconditioner.  All other containers should be
disposed of in an environmentally safe manner and in accordance with
government regulations.

-------------------------------------------------------------------------------- HEALTH AND HAZARD INFORMATION

-------------------------------------------------------------------------------- EXPOSURE LIMIT FOR TOTAL PRODUCT: Monitor data listed in the

  Components and Hazard Information section.
VARIABILITY AMONG INDIVIDUALS:
Health studies have shown that many petroleum hydrocarbons and synthetic
lubricants pose potential human health risks which vary from person to
person.  As a precaution, exposure to liquids, vapors, mists, or fumes should
be minimized.
DATE ISSUED
27-NOV-06

Page 2

             MATERIAL SAFETY DATA SHEET FOR VELOX 3
                TOTAL Lubricants USA, Inc.
                5 N. Stiles Street
                Linden NJ  07036

REVISION DATE
08-MAR-06 --------------------------------------------------------------------------------

HEALTH AND HAZARD INFORMATION --------------------------------------------------------------------------------

EFFECTS OF OVEREXPOSURE (Signs and symptoms of exposure):
Prolonged or repeated skin contact with this product tends to remove skin oils
possibly leading to irritation and dermatitis.
Product contacting the eye may cause irritation.
Product has a low order of oral and dermal toxicity.
Possible aspiration hazard.
Induced vomiting may cause aspiration of product into the lungs.
(See Emergency First Aid Section)

PHYSICAL DATA
The following data are approximate or typical values and should not be used

for precise design purposes.

BOILING RANGE:
Wide range
SPECIFIC GRAVITY (25°C/25°C):
(WATER = l)
< l.0
MOLECULAR WEIGHT:
Wide range
EVAPORATION RATE @ l ATM. AND 25°C
(77°F)  (n-BUTYL ACETATE = l):
< l.0
POUR, CONGEALING OR MELTING POINT:
n/e
VAPOR PRESSURE:
< 0.l @ 38°C/l00°F
VAPOR DENSITY (AIR = l):
> 8
PERCENT VOLATILE BY VOLUME:
Negligible
SOLUBILITY IN WATER @ l ATM. and 25°C
(77°F):
Negligible
FREEZING POINT:
n/e

-------------------------------------------------------------------------------- REACTIVITY --------------------------------------------------------------------------------

This product is stable and will NOT react violently with water.  Hazardous
polymerization will not occur.  Avoid contact with strong oxidants such as
liquid chlorine, concentrated oxygen, sodium hypochlorite or calcium
hypochlorite, etc., as this represents a serious explosion hazard.
DECOMPOSITION PRODUCTS UNDER FIRE CONDITIONS:
Fumes, smoke, carbon monoxide, oxides of sulfur,  and other decomposition
products, in case of incomplete combustion.
CONDITIONS TO AVOID:
Open flames.

-------------------------------------------------------------------------------- TOXICITY --------------------------------------------------------------------------------

ORAL (Acute)                    N/E
DERMAL (Acute)                  N/E
EYE                             N/E
DATE ISSUED
27-NOV-06

Page 3

             MATERIAL SAFETY DATA SHEET FOR VELOX 3
                TOTAL Lubricants USA, Inc.
                5 N. Stiles Street
                Linden NJ  07036

REVISION DATE
08-MAR-06 --------------------------------------------------------------------------------

TOXICITY --------------------------------------------------------------------------------

INHALATION (Acute)              N/E
CHRONIC, SUBCHRONIC, ETC.       N/E
Medical Conditions Aggravated by Exposure:   Unknown
This product does NOT contain any ingredients identified as carcinogenic by
IARC, NTP, or OSHA.
All components known to be contained in this product are on the TSCA inventory
or are exempt.
SARA Section 313 Status:
This material is not known to contain any
chemicals on the SARA Section 313 list at a
concentration greater than 1.0 percent or
carcinogenic chemical on that list at a
concentration greater than 0.1 percent.

-------------------------------------------------------------------------------- SPILL OR LEAK PROCEDURES --------------------------------------------------------------------------------

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED:
Keep product out of sewers and watercourses by diking or impounding. Absorb with sand or inert material. Sweep or scoop up and remove. Prevent spread
of spill. Advise authorities if product has entered or may enter sewers, watercourses or extensive land areas. Assure conformity with local regulations.

WASTE DISPOSAL METHOD: (Consult federal, state, or local authorities for proper disposal procedures.)
Assure conformity with applicable disposal regulations. Dispose of absorbed material at an approved waste site or facility.

-------------------------------------------------------------------------------- PROTECTION AND PRECAUTIONS --------------------------------------------------------------------------------

VENTILATION:  (Always maintain below permissible exposure limits.)
Use local exhaust to capture vapor, mist or fumes, if necessary.
Provide ventilation sufficient to prevent exceeding recommended exposure
limit or buildup of explosive concentrations of vapor in air.
RESPIRATORY PROTECTION:  (Use only NIOSH approved equipment.)
Normally not needed at ambient temperatures.  Use supplied air respiratory
protection in confined or enclosed spaces, if needed.  Use filter, dust, fume,
or mist respirator type under misting conditions.  Use can or cartridge; gas
or vapor respirator type under conditions exceeding TWA standard.
PROTECTIVE GLOVES:
Use chemical-resistant gloves, if needed, to avoid prolonged or repeated skin
contact.
EYE PROTECTION:
Use splash goggles or face shield when eye contact may occur.
OTHER PROTECTIVE EQUIPMENT:
Use chemical-resistant apron or other impervious clothing, if needed, to
avoid contaminating regular clothing which could result in prolonged or
repeated skin contact.
DATE ISSUED
27-NOV-06

Page 4

             MATERIAL SAFETY DATA SHEET FOR VELOX 3
                TOTAL Lubricants USA, Inc.
                5 N. Stiles Street
                Linden NJ  07036

REVISION DATE
08-MAR-06 --------------------------------------------------------------------------------

PROTECTION AND PRECAUTIONS --------------------------------------------------------------------------------

WORK PRACTICES/ENGINEERING CONTROLS:
Keep containers closed when not in use.  Do not handle near heat, sparks , flame
or strong oxidants.
PERSONAL HYGIENE:
Minimize breathing vapor, mist, or fumes.  Avoid prolonged or repeated contact
with skin.  Remove contaminated clothing; launder or dry-clean before reuse.
Remove contaminated shoes and thoroughly clean before reuse; discard if oil-
soaked.  Cleanse skin thoroughly after contact, before breaks and meals, and
at end of work period.  Product is readily removed from skin by waterless hand
cleaners followed by washing thoroughly with soap and water.

-------------------------------------------------------------------------------- PREPARED BY: Steve Smith REGULATORY MANAGER --------------------------------------------------------------------------------

THE ABOVE INFORMATION IS ACCURATE TO THE BEST OF OUR KNOWLEDGE.
HOWEVER, SINCE DATA, SAFETY STANDARDS, AND GOVERNMENT REGULATIONS ARE
SUBJECT TO CHANGE AND THE CONDITIONS OF HANDLING AND USE, OR MISUSE
BEYOND OUR CONTROL, SELLER MAKES NO WARRANTY, EITHER EXPRESS OR
IMPLIED, WITH RESPECT TO THE COMPLETENESS OR CONTINUING ACCURACY OF THE
INFORMATION CONTAINED HEREIN AND DISCLAIMS ALL LIABILITY FOR RELIANCE
THEREON. USER SHOULD SATISFY HIMSELF THAT HE HAS ALL CURRENT DATA
RELEVANT TO HIS PARTICULAR USE.
DATE ISSUED
27-NOV-06

Page 5